-
Hello, I am unable to boot linux kernel 5.4 with rt patch on STM32MP157-DK2 development board.
# Steps to reproduce
- checkout v5.4.x branch
- select `toolchain="gcc_arm_gnueabihf_10"` in versio…
-
After going through the instructions [here](https://optee.readthedocs.io/en/latest/building/devices/stm32mp1.html) to run OP-TEE on my board, I am unable to start tee-supplicant also /dev/tee does not…
-
make -C buildroot TOOLCHAIN_EXTERNAL_INSTALL_DIR= ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- BUSYBOX_CONFIG_FILE=/buildroot/board/pluto/busybox-1.25.0.config all
ERROR INFO:
relocation R_X86_64_…
-
**Describe the bug**
On master branch, the overlay of board for shield x_nucleo_iks01a2 are not applied on correct order.
The zephyr/boards/shields/x_nucleo_iks01a2/boards/stm32mp157c_dk2.overlay …
-
Hello
I am trying to build an Image based on the Yocto Project for my stm32mp157c-DK2 according to :
https://wiki.st.com/stm32mpu/wiki/STM32MP1_Distribution_Package#Building_the_OpenSTLinux_di…
-
Hello,
when I run the script on Raspberry Pi Compute Module 4 rev 1.0, i am getting a "Board not supported" error message.
Here are the info from detect.py:
Chip id: BCM2XXX
Board id: None
…
-
Hi,
I am able to enable e.g. belcarra-acm-rndis.json but when I try to enable hid-example.json from the repo I get
```
root@stm32mp1-dxua-1:/usr/lib/python3.8/site-packages/commentjson-0.9.0-py…
-
**Describe the bug**
Unable to compile with meta-rust HEAD (be88d857a6ba9134abb795b3a34d3a839196335f)
**To Reproduce**
1. Add the layers
2. Compile
**Expected behavior**
`iotedge-cli` should…
-
**Crate name:** stm32mp1
**Build failure link:** https://docs.rs/crate/stm32mp1/0.11.0/builds/290188
**Requested RAM limit:** 8GB
**Requested timeout:** 15min
**Requested number of targets:** 1
…
-
As the title suggests, it seems that genimage 13 is unable to create a valid disk image and errors out when there are more than 3 partitions with their type defined, with hdimage being gpt.
ERROR: …