-
Hi, sometimes when i click Auto Home on the printer and will start than a print or Bed Visualizer with Octoprint, it kicks me out and gives error "kill()".
On the "original" firmware it was working…
Marow updated
3 years ago
-
### Bug Description
When capturing a mesh using Octoprint Bed Level Visualiser I get a printer error popping up, the topuchscreen is yellow with "M112 Shutdown" error message (also, "Auto Homin…
-
Hello, i'm having An issue when i upload Marlin 2 to my Skr2.0 revB with 2209 stepper drivers. Printer is a tronxy x5s corexy model. I can move all Axis, however X and Y only move diagonally. Corexy …
-
### Bug Description
Home failed message during the homing after ABL
### Configuration Files
**Required:** Community firmware alpha 4
### Steps to Reproduce
1. Complete auto bed …
-
The grasping command currently being used in the program is not working correctly.
At the moment, the grasp is implemented by simply moving the hand joints to zero.
```
def close_gripper(se…
-
Sorry for leaving this comment here, but I spent some time this weekend reviewing all the signalk projects and I'm pretty impressed by the community. I've been in the dev world for a few decades and a…
-
with the new version of jyers the nozzle temps extremely fluctuating between 190 -210 by an setted tem of 200.
i have done a pid tunnig , its done ok but after saving the fluctuating nozzle temp also…
-
I don't think the Strain Gauge data sheet will be on Amazon, please find out which is the model of the SG and search for that data sheet somewhere else. You can let me know which is the model, I can t…
-
As discussed in the Discord #general channel, some users are noticing that the value of Z Offset required to get a good first layer can vary from less than 0.1mm to more than 0.5mm, from one print to …
-
### Bug Description
When I start the auto bed leveling after the home position, the nozzle moves to first probing and immediately turns back in origin
### My Configurations
Community firm…