-
- is there a need to change pin config if the ch2i backplane is used? the schematic there states different pin connections in comparison to your installation guide. eg. rst pin is connected to Rpi 22…
-
We've been banging our heads for a bit on this issue, and I'd like to get some insight into what might be going on in the s2e_nextTxAction state machine to cause this "radio is not emitting frame" err…
-
This is probably a bug.
I noticed that the Basic Station crashes when the server closes the Websocket connection (e.g. because read timeout, termination / restart of the LNS, ...). The following lo…
-
I'm currently using the plain **lora-packet-forwarder** init file based on procd tailored to the **pico_pkt_fwd** :
the main change is basically the change of the executable name from l**ora_pkt_fw…
-
With RPI4 and RAK2245 I get:
```
Initiating the multi-channel Lora packet forwarder...
============================
Restarting the CE0 pin...
Done
Restarting the Concentrator...
./start…
-
I've installed iotedge and set modules on my edge Gateway device. All runs except pktfwd
Below is the log of the packet forwarder. What am I missing to get it to run?
I installed the spi-enable …
-
I'm not an electronics guy. I think I understand how it works on the device to chain slaves, etc.
https://www.makeuseof.com/tag/enable-spi-i2c-raspberry-pi/
Given that, I can understand how many s…
-
- [X] The issue is present in the latest release.
- [X] I have searched the [issues](https://github.com/brocaar/chirpstack-application-server/issues) of this repository and believe that this …
-
Randomly getting the above error when sending packets back from a network server to the gateway. The error is misleading because the txpk packet was received by the gateway in time and queued on the J…
-
Hello Xue Liu,
https://github.com/lorabasics/basicstation/releases Basicstation 2.0.5 (with support for ACM USB devices) is out, it's possible to align the code for compiling? Thank you for you work