-
I think there's an error in the signal path to the main output. From my testing and https://www.youtube.com/watch?v=YUucqDjB2GY it seems that inputs 3-4 don't route to the main out, just 1-2. I have n…
-
Investigate...
-
5:15pm: I set the left side to 16 deg F instead of 0 deg F in an attempt to give the right side more cooling time since it appears to be sharing cooling time right now 50/50 between the two sides.
…
-
it works with original etwows app though. donno why. when i try to PAIR in settings, it just ask for a pin nr. what I do not know.
-
Hello,
I encountered yesterday a strange problem with my MP2 5000 48V. I use EM24 for grid measuring and BasenGreen battery. BMS and all things working well.. since yesterday 8 PM. My solar product…
-
Hello,
I ran your scripts successfully on my VTO2000A. Could you also add the VTH1550CH?
I am getting this output when I extract the software with the VTO2000A switch.
```
/home/bavilo/Dahua-F…
-
Hi. Nust wondering if the R has any other meaning as lowering the initial 16s lifepo4 voltage down to around 38V. As from my understanding you dont need Rs while using 12 or 24V (4 or 16S lifepo4) sys…
-
Simulate delay with strobed outputs
an 'output' in this case is a MAME output port or pin, such as for a 7segled: output().set_digit_value(index, state);
The problem is really simple. We need to simu…
-
The Lynx smart BMS paralleling feature automatically aggregates ALL Lynx BMSes with the same N2K device instance. This also means that BMSes managing totally different battery banks will be aggregated…
-
### Describe the problem
Good day everyone,
I have 4x Narada 48NPFC50 batteries that use a TianPower ND1502 BMS, so this uses the lifepower BMS driver
I have 2 problems:
problem 1: The driver …