-
How can i create '~88 chars', // (recommended) uncompressed public key P-256 encoded in Base64-URL
Centos 7.5 (Linux version 4.1.12-124.18.6.el7uek.x86_64 ) php 7.2.12 Apache 2.4
app.js
----…
-
Thanks for this wonderful application.
I have a Seed Studio flow meter http://www.seeedstudio.com/depot/G12-Water-Flow-Sensor-p-635.html hooked into my raspberry pi.
I am using wiringpi like the cod…
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
If the Mqtt logging level is set to "2 Info" from the default "0 None" the device will reboot every few minutes …
-
I am running the Ardiuno IDE with the NODEMCU esp8266 and have no had any problems until now and I can not figure out exactly what is wrong.
I tried using new and old esp8266, one with the CP210…
-
Hi, I downloaded and installed your library and uploaded the example sketch, but it causes ESP8266 to give error messages as soon as the sketch begins to run.
Fortunately I have worked out a fix. The…
-
Thank you TMRh20 for your great work on RF24 and RF24Network libs.
My config:
node 0: ESP8266 + nRF24L01+ mini
node 1: Arduino Pro Mini + nRF24L01+ mini
Wires are OK because:
works with MySensors l…
-
I have a T6963C display that has a different pinout and resolution then available in the lib.
The pinout i got fixed.
1: GND (connected to 2)
2: GND
3:+5V
4: VO (powered by external -15V and POT…
-
I'm trying to build the code that runs on the Due.
In the Build.txt file I see instructions for editing the platform.txt file. This is fine.
In version 1.8.2, this file seems to have moved. It i…
-
When I read the value, the resonse data increase or decrease slowly in step of aroud 3~4 g and finally stablize in the item weight. Is that possible to get the data immediately or much faster? I use t…
-
This is strange.
When using LaserGRBL I go to GRBL Configuration and set $32 to 1 to enable Laser mode in GRBL 1.1f.
After clicking the Write button GRBL saves the setting.
I close LaserGRBL and re…