-
Currently the Midimonster is event based which means that every action is executet at an event.
For more complex configs, a mapping priority would make sense to execute more important translations fa…
-
Compiled, all good. Can connect, send data to light fixtures, change colors etc, but getting flicker all the time. If I set CPU to 80Mhz in Arduino, flicker is almost gone, to one or two a second. Wha…
-
Hi,
in my request to build your software i setup a VM and install arch on it
Installing git and dl your PKGBUILD
what fine for xtensa-lx106-elf-binutils but it failed in xtensa-lx106-elf-gcc
here is …
-
When I start dmx-hue in terminal and leave it open, I then go to the Lightkey app to connect to Art-Net and I get this error about the port being used already by dmx-hue
![Screenshot 2023-10-31 at …
-
Hello!
I flashed the v2 binary on a NodeMCU. Connection to the wifi hotspot works, but i cannot access the config website. The issue occurs both with the standard and Wemos binary. Erasing the flas…
-
LightFactory is a Windows program for controlling a lighting system using DMX or ArtNet/sACN. There are already a number of ways to interact with the program. I've had success using the generic modu…
-
I am using esp8266-07 and after uploading the RX pin project, it is the output pin
I want to make changes so that the TX pin is the DMX output pin
I changed the LED pin according to what I want, but…
-
Did anyone manage to read the scenes from the device using the SPE801 WIFI + AP + ST + Artnet controller?
I got pretty far through educated guessing. I also found the TCP response through wireshark…
-
OLP has a generic Art-Net implementation (https://github.com/OpenLightingProject/libartnet). This should probably be preferred to the current "custom" implementation
-
My Panel ID from one of my Nanoleafs is 54510, and i always get the error invaid value returned. (plugins/nanoleaf/NanoleafDevice.cpp:82)
it seems the variable for panels is too small for new gens.…