-
# UHSDR Firmware Defect Issue (Bug) Template 1.1
## Issue Data goes here (please remove text above):
Your firmware version: 2.11.81
Your bootloader version: 5.0.4
(Please note, we will general…
-
Hi, the build works fine, but when building another package, for example linhpsdr, the following happens:
gcc -o linhpsdr main.o css.o audio.o version.o discovered.o discovery.o protocol1_discovery…
-
Hello,
today i was trying the new gr-satellites and i have tried the command Dani suggested me to test the flowgraphs.
i have tried with the AO-73 which was the one i had problems.
I gave the comma…
-
gr::log :WARN: dvb_bbheader_bb0 - Transport Stream sync error!
frame = 0, BCH decoder too many bit errors.
Baseband header crc failed.
-
When using the default SNR estimators for PSK signals, it seems that we only get desired output when we use the imaginary components of the SNRs. A workaround for this is that we currently choose the …
-
Hi,
I want to check how many errors in one frame before decoding, so I remove the warning in Decoder_LDPC_BP.cpp to make aff3ct support zero decoding iteration. I use this to dump the error statist…
-
Hi guys,
I've bought the `ESP32-CAM WiFi + bluetooth Camera Module Development Board ESP32 With Camera Module OV2640 IPEX 2.4G SMA Antenna` from Greekcreit with module cam-progShort from Tindie (to…
-
Hi Bastian,
During the test of the loopback example, I have observed when I increase the PDU length an error related to the IEEE802.11 chuncks to Symbols block indicating :
**thread[thread-per-blo…
-
In the previous version of gr-satellites, I changed 2 parameters in the decoder :
- The Low Pass Filter width was set to 4800, but I found that setting the cutoff frequency to 6875Hz was close to th…
F1EBK updated
4 years ago
-
Hi,
I'm doing analysis of high speed protocol and found strange thing. Currently high speed payload size if 4600 bytes. But when FoxTelem decodes them, it parses only ~1340 bytes. 1 realtime teleme…