-
I found new Parameter descriptions by tinkering with my
Alpha Innotec WZSV 62K3M Version V3.89.5
Channel 232: Vapourisation_Temperature (Celsius)
Channel 233: Liquefaction_Temperature (Celsius)
…
-
Hi.
Can u tell as electronic parts cost? I mean similar. It's about 30, 50, 100EUR?
Do you plaining to add wi-fi?
Are you planning to develop the project?
Controller works fine? Any issues?
Its p…
-
### The problem
This issue may be related to this one: https://github.com/home-assistant/core/issues/111628
When trying to set temperatures via the ViCare integration, I do get mixed results:
- s…
-
Hi,
I used the bouni luxtronik integration first and then switched to yours now. when I'm trying to migrate from below version, the migration fails and I have no idea how to fix. If I remove the i…
-
Hi Robert,
Great work with the Influxdb addition.
A suggested improvement is to add functionality to measure counts on 2 IO so that s0 pulses from kWh meters can be recorded.
Every pulse shou…
-
Hi,
I have a WPC-07 pump with the following modules: WPM3i, FES, FEK, MFG, unfortunately ESPHome (2023.8.2) does not read most of the sensors. Is it possible to adapt the code to my pump? I tested t…
-
I'm not sure if it is related (or helpful) but hvac_action_reason doesn't get set to anything at all after a restart until the thermostat takes some 'action' again.
So if it was target_temp_reached…
-
With the BDR91T now functionaly is added to the controller.
To only difference between the BDR91 and BDR91T is sotware..
But still at the controller there will be different settings.
The ID is acc…
-
Since the update to the firmware version wp2reg-V3.88.0-9015 the values for the "Wärmemenge" und "Eingesetzte Energie" are no longer read:
luxtronik2.0 2023-01-21 10:48:53.092 error Couldn't handle…
-
(I'm adding this issue so that I can do a pull request to implement the feature myself.)
In my use-cases, I have a dashboard configured with bubble button cards in slider mode, where the sliders in…