-
Not a big deal at all, but curious what your source is for calculating CSI in dashPanel?
I've been calculating CSI on my own for a while now - so long that I can't even remember the original sour…
-
I have an IntelliTouch i5+3, but this client identifies it as an i5+3S.
My physical setup is a two body system (pool and spa) with shared equipment. The S designation above is for a SINGLE body sys…
-
**Home Assistant release with the issue:**
0.100.2
**Last working Home Assistant release (if known):**
N/A
**Operating environment (Hass.io/Docker/Windows/etc.):**
Ubuntu Server 18.04…
-
Changing IntelliFlow pump RPM results in outbound message error.
Changing the pump speed results in:
Message aborted after 3 attempt(s): 165,1,16,33,155,47,1,128,0,0,0,6,10,1,11,0,0,0,0,0,0,0,0,…
-
Description clearly states that a RS485 adapter is required.
Pentair has a networkable protocol adapter - P/N 520489.
Make this library capable of communicating with the adapter.
-
**To Reproduce**
In dashPanel:
- change pool setPoint using the +/- (or manual entry)
- it will revert to original value
**Expected behavior**
new setPoint will be committed
![ezgif com-gi…
-
**Expected behavior**
A clear and concise description of what you expected to happen.
**All I really need is pump control for now. A few commands.**
**Using Pi3b, 64 gb card, JBtek USB to RS48…
-
I'm doing experiments to verify Intellichem packet understanding and will post results in this issue. I posted a spreadsheet which shows packets for each experiment, and does the calculations/decodes…
-
running the 8relay command to enable a relay doesn't sync with what REM sees the relay as for all relays and vice-versa. I made a table of how they're currently mapping. So for example, when I activa…
-
**Describe the bug**
I have an Intellicenter with the i10D (523029Z) module. It is incorrectly being identified as a 522039 cover module. The system is being identified as an i5P.
**Expected beh…