-
In the meantime, while the other issue is being discussed:
What I want to do with this E310 is basically direction finding. For this purpose, I am using the latest firmware (https://github.com/Micr…
-
sysnetlabcomp6@sysnetlabcomp6-HP-EliteDesk-800-G1-TWR:~/srsRAN_4G/build$ sudo ./srsue/src/srsue
Active RF plugins: libsrsran_rf_soapy.so libsrsran_rf_zmq.so
Inactive RF plugins:
Couldn't open …
-
Hi,
This code seems to ignore the frequency setting. I am using AntSDR E310, try changing the frequency both to 145500000.
-
I am a bit confused by the file output format. I would assume that the following:
hacktv -o test.dat -t int32 -s 100000 -v -m m test
Would produce a file 'test.dat' comprised of complex IQ (2x i…
-
FIRST: Before reporting any bug, make sure that the bug you are reporting has not been reported before. Also, try to use the [nightly version](https://www.sdrpp.org/nightly) if possible in case I've a…
-
**Description of the issue**
SatDump freezing during startup. Log stops after/during loading of pipelines. The GUI window is created but is completely transparent with no visiable content. I get an E…
eggix updated
8 months ago
-
Hi,
I'm running a no-OS project with the following setup: ZCU102+FMCOMMS2, and trying to observe the spectrum of a received signal with an IIO Oscilloscope installed on a host (my desktop computer)…
-
FIRST: Before reporting any bug, make sure that the bug you are reporting has not been reported before. Also, try to use the [nightly version](https://www.sdrpp.org/nightly) if possible in case I've a…
-
**Hardware**
- CPU: Raspberry Pi 3 ARMv7 Processor rev 4 v71
- RAM: 1 GB
- SDR: local (sdrpp Nightly Build)
**Software**
- Operating System: v11 (Bullseye) 27-swp-2023
- Install
sudo apt…
-
I tried loading the new 34 firmware as mentioned here: https://github.com/plutoplus/plutoplus/issues/14 - the pluto plus (ver.2) does not show
ad9361-phy,xo_correction:
ad9361-phy…