-
Only the card change is detected but never any transfer or data led activity visible. Only my green power led is always lit.
Tried every driver/boot version I could think of on my Amiga 1200 but the …
-
Hi !
This is not an issue, I'm the issue because i'm a really noob about code ...
But thank's for your cool and hard work about TMC chips.
My coding level can't go further than to use simple th…
-
Continuing the conversation from:
https://github.com/EnviroDIY/SensorModbusMaster/issues/21
There is a need for an updated [RS-485 Half Shield](https://www.envirodiy.org/product/envirodiy-rs-485-h…
-
Reference:
There are a few past discussions and recent discussions on getting the serial number without opening the device handle
Past discussion:
https://marc.info/?t=142939771300004&r=1&w=4
h…
mcuee updated
4 months ago
-
All my small (5mm width) APA102C ledstrips show blue when they are supposted to be black for the leds that are initialised. So in below example 10 leds are blue when they should be black. The rest of …
GvBon updated
1 month ago
-
Hi,
For the holidays I was working on a WS2811 LED strip (5 meter, 3 LEDs per WS2811 chip) together with a Wemos D1 mini (ESP8266) as a controller.
The Neopixel library offers the NEO_KHZ400 opt…
mctrp updated
4 years ago
-
Hi. Hope someone can help me. The board works fine, which mens i can upload new firmware and i can control fans and other hardware devices using PrintRun for Mac. But when i try to control the stepper…
-
Going with a Polulu Tic 500 instead of an MDD3A, which doesn't have current limiting. I could only get the stepper motor to make noises or jolt even after a reasonable amount of troubleshooting, tryin…
-
Not an expert so I hope this request is not silly..
I tried your example files driving a WS2812B 8x8 LED Matrix with an Arduino Uno R3. They work fine but other than LedStripColorTester, they are v…
-
```
This is a space for Fritzing users to upload and share their self-created
parts with others.
Add your part by adding a comment to this issue and attach your part as a
.fzpz file.
(You can get …