-
modify chrony.conf to add a gps source server from GPSD
```
driftfile /var/lib/chrony/drift
allow
# set larger delay to allow the NMEA source to overlap with
# the other sources and avoid the fals…
-
It is necessary to integrate the HLK transceiver in the bootloader for Cortex M3.
-
# ESP-AT New Features Collection
### A. Brief Introduction
Currently, many AT commands have been added to the esp-at project, but esp-at still does not meet the requirements of all products.
Here…
-
Hi all.
Device: Redmi Note 12 4G (TAPAS).
CPU snapdragon 680.
log:
Qualcomm Sahara / Firehose Client V3.60 (c) B.Kerler 2018-2022.
main - Trying with no loader given ...
main - Waiting for the …
elmnn updated
5 months ago
-
* **SOC**:
Rockchip RK3188
http://rockchip.wikidot.com/rk3188
* **CPU**:
`ARMv7 Processor rev 0 (v7l)`
* **GPU**:
`---`
* **Memory**:
`1023680 kB`
* **Storage**:
```
Filesystem …
-
I've tried pretty much everything I can find and I cannot get the modem to connect NAT working for the life of me 🙁
This is the device I am using...
https://www.aliexpress.us/item/3256806989722627…
-
**Describe the bug**
When adding a target library via target_link_library, the tool does not generate the necessary definitions from the libraries 'mbed_lib.json`. This issues was encountered on the …
-
I need to use WebSocket for MicroOCPP application. I am using a Quectel EC25 model modem and ESP32 S3 WROOM -1.
-
*yurtesen:*
I get 4G service from a provider which provide public IP if APN of "opengate" is used. I found out that qmi.sh does not set the card correctly. The `--autoconnect` setting seems to be the…
-
**Describe the question**
Hi, I've recently been working on U-Boot support for Qualcomm boards, including support for a handful of phones that the community support running close-to mainline kernels …