-
I'm having trouble with the T-SIMCAM esphome yaml provided.
If trying to build using the latest 2024.7.2 I get a boot loop.
If trying to build using 2022.6.3 (when you produced that code), I get…
-
### The problem
WiFi network was not available for couple of minutes during software upgrade.
Devices reconnected to WiFi & HA with no issues, not rebooted as downtime was short.
But: ADS1115 rea…
-
Возможна ли установка на последнюю прошивку ? Пробовал несколько раз - безрезультатно.
-
An easy way to avoid stuff like #1010 would be to have it check that the board_id matches the filename. This will probably need some valid exceptions added like unknown though. Also, this would need t…
-
### Board
LOLIN S2 MINI
### Device Description
Rotary Encoder, OLED display, External EEprom, Buttons..
### Hardware Configuration
i2c - SCL on GPIO 35, SDA on GPIO 33
SPI - MOSI 11, MISO 9, and…
-
### Board
Generic development board with a ESP-WROOM-32
### Device Description
Brandless generic Development board and development board with ESP32 module adapter.
### Hardware Configurati…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
* Home Assistant Version (eg. 2023.11): 2024.10.4
* Ember Mug Component Version (eg. 0.8.0): 1.0.0
* Which device(s) are you using for Bluetooth (e.g. Bluetooth Dongle / ESPHome Proxy): ESPHome Blue…
-
the chips i need to flash are soldered onto their power supplies - as in most of the LED bulbs i can find around here.
i have built a wifi linked flashed using an esp8266 chip, provides a telnet se…
-
### Port, board and/or hardware
RP2, Board Arduino Nano Connect 2040 with NINA W102 module.
### MicroPython version
MicroPython v1.24.0-preview.118.g5f3ecc29f on 2024-07-20; Arduino Nano RP20…