-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
If deactivate the classic Jerk and have DGUS active give this error
This is a compilation …
-
Здравствуйте, собираюсь прочитать при помощи raspberry pi + языка
программирования python обороты двигателя моей toyota caldina 1993
года, нашел вот такую расшифровку алгоритма
http://toyota.kgbcon…
-
When I comment the Stop button in like in the demo for A4988 then the motor don't stop. Only the following error on console:
`Test file: Stopping motor
Traceback (most recent call last):
File "/u…
-
Why do I get this message No SD Card, I have a good SD card in the slot so how do I fix this problem
the unit was working just fine and now I can't see the SD Card
-
Hi, really glad there are people like yourself helping those who can't program still have access to SCARA firmware! I have recently built my own single arm but have been having trouble getting the fir…
-
The Grbl shield uses A4988 drivers, so I would like to know if I can use this library (and, in general, any library that supports A4988) to control stepper motors that work with a Grbl shield using A4…
-
### Documentation details
We need to advise users to adjust the current limit for the two wire stepper drivers (A4988/DRV8825/TMC2208/etc.)
### Page with issues
_No response_
-
Current Astroberry focuser cannot work on Raspberry PI 5.
To use the same GIPO numbers as before, gpiochip4 should be used.
I have created code to get the model name from /sys/firmware/devicetree/…
jctk updated
5 months ago
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
When using G2/G3, the feedrate is oscillating during the arc ~ +/- 3%. For testing I trie…
rnj1 updated
2 months ago
-
Hello does anyone know whether the ender 3 v2 with 4.2.2 board is compatible with a BTT tft50 display?