-
_From @FineLineAutomation on March 23, 2014 20:8_
Is there a mechanism in the stepper motor library to communicate back to the PC how many steps the stepper motor has moved? Trying to implement a liv…
-
I'm trying to figure out a way to handle stopping at limit switches. I have a minimum limit switch and a maximum limit switch for each motor. It appears that the emergency stop function cannot be ca…
-
Arduino: 1.8.0 (Mac OS X), Board: "Arduino/Genuino Uno"
cory_upwork:17: error: expected ',' or ';' before 'void'
void forwardstep()
^
cory_upwork:27: error: 'forwardstep' was not declared in t…
-
The stepper motor can skip steps at high load if we apply constant step frequency, but is able to go faster more reliably if gradually accelerated to target rpm. Similarly, slowly braking can help the…
-
Please add this library.
https://github.com/waspinator/AccelStepper
Thanks
-
Hi, I use the lib with the HX711 as previous amplifier TM7709 could not be obtained anymore.
In my curent project I use a steppermotor and the accelstepper lib.
Both libs work seperate without problem…
-
Hi, nice library. I am using it with arduino pro-mini and 128x64 OLED (u8g2) but I am running out of RAM (and flash too). I have a couple of 23K256 spi Sram chips that I would like to use, would it be…
-
Hello there im just inquiring about a error that im getting from a example 7 found in
http://www.schmalzhaus.com/EasyDriver/Examples/EasyDriverExamples.html
im not sure but this is the error im g…
-
I am building this using a DIY Easy Driver shield and have it breadboarded at the moment. Everything seems to be wired correctly, using the 'patched' Softmodem library, the multimeter reads the pins f…
-
We use [accelstepper](http://www.airspayce.com/mikem/arduino/AccelStepper/).
It's GPL license library. There has to be one open source library for driving stepper motor.
Create one if it doesn't exis…