-
It would be nice if there would be a possibility to add more than just the DIP pintable.
Some chips have different packages and currently only one is possible.
Examples:
http://datasheets.maximi…
-
I've made the code porting for your CANFestivino project on an ATtiny1634.
The main modifications were on the library digitalWriteFast.
Currently the code is very near to the entire flash content of…
-
If Zero board has the ability of being debugged, and the low-level tools (openocd, gdb) already exist and are shipped within the IDE, it's a pity that IDE doesn't offer a basic GUI interface to them. …
-
```
Here is two diffs for enable EEPROM support.
- Fixes bug from Issue #65
- Adds extra EEPROM page r/w code
- Still complied to 256 words if LED_START_FLASHES=0 and LED_DATA_FLASH=0
- Tested on…
-
```
Here is two diffs for enable EEPROM support.
- Fixes bug from Issue #65
- Adds extra EEPROM page r/w code
- Still complied to 256 words if LED_START_FLASHES=0 and LED_DATA_FLASH=0
- Tested on…
-
Really awesome project!
No longer using the ATMEGA8 and 168, so was hoping to repurpose the space used for those two, and instead add some of the other chips I regularly bootload (ATmega 1284p, 644…
ghost updated
11 years ago
-
```
Here is two diffs for enable EEPROM support.
- Fixes bug from Issue #65
- Adds extra EEPROM page r/w code
- Still complied to 256 words if LED_START_FLASHES=0 and LED_DATA_FLASH=0
- Tested on…
-
```
Here is two diffs for enable EEPROM support.
- Fixes bug from Issue #65
- Adds extra EEPROM page r/w code
- Still complied to 256 words if LED_START_FLASHES=0 and LED_DATA_FLASH=0
- Tested on…
-
```
Here is two diffs for enable EEPROM support.
- Fixes bug from Issue #65
- Adds extra EEPROM page r/w code
- Still complied to 256 words if LED_START_FLASHES=0 and LED_DATA_FLASH=0
- Tested on…
-
Hi,
Thanks a lot for your library, i tried to make it work on ESP32.
I don't manage to make it work in SPI.
What's the method to declare the MS5611 in SPI
// Address when using I2C,…