-
## Motivation / Idea
I plan to work with a large number (~500) of `STM32F107`s over an Ethernet network. In order to simplify the process of uploading new firmware to each node, I'm using a fork of…
-
After booting the pi and powering on the ESP32 HID device, everything connects and functions properly.
When taking the ESP32 out of range, and bringing it back it _sometimes_ will not function, de…
-
I don't if this package is still working, but I can import it, but failed to use it.
-
Hi @T-vK
Thanks, that was fast.
In general it is working. In your Hid device descriptor was a (2) instead of (1) at the report id 2.
```REPORT_ID(1), 0x02, // REPORT_ID (2)```
Wi…
-
### Describe the problem
If core 2.0.18 in installed sketches fail to compile in IDE2 but will compile in IDE1
IDE2 can not cope with the too long folder name of 2.0.18
### To reproduce
Just com…
-
# shownb.github.com
shownb.github.io/test
Table of Contents
=================
* [变更日志](#变更日志)
* [其余](#其余)
* [Service表](#Service表)
Installation
============
## GAP(Generic Access…
-
I have a embedded stenography system on a BLE keyboard, so the firmware would press and release the keys as fast as possible to deliver the keys to the host. On Linux with BlueZ, this sporadically pr…
-
simultaneous dual mode operation does not work correctly on the A12 revision out of the box.
It does work out of the box on CSR8811 A08 chips.
The A12 revision has a new boolean pskey which defaul…
-
Devices used,
Ipad 8th generation
2020 M1 Mac mini
Dell Optiplex 9010, I73770K 32gb ram, 2.5tb fast SSD storage, Games and controllers work fine on system its self.
Steam Link tested on iPad, an…
-
Parent Issue: #76
The list below are files that have been released in the past by BES. These files are largely similar to those previous releases but include changes that have not been explicitly …