-
**Describe the bug**
The spoilers don't really extend much when you deploy the min the air with flaps extended.
**To Reproduce**
Extend flaps and extend spoilers
**Expected behavior**
They sh…
-
From what I can tell, the line emitted into the `.key` file seems to be incompatible with BMS 4.34. For instance, when mapping my Warthog to call `SimIdleDetentForward` when it's moved forward out of …
-
_From [irasc...@gmail.com](https://code.google.com/u/104729248032245122687/) on May 25, 2010 11:47:05_
Connect some parts with wires and try dragging the parts with the shift-key
down. Notice that …
-
Would the contribution of a replacement for the UP/DOWN/SELECT buttons interface that used a quadrature rotary encoder with a press switch be welcomed?
They would use three GPIO just like the exist…
-
Spinning this off #8139
@maryclarke suggested adding number indicators to the storage sliders.
> For the scale, if possible, it would be good to add the two end points for reference. Those end po…
-
Dears,
many thanks for this great plugin although I didn't manage to work so far. I am a real newbie to this. So, probably sorry for this question. I use following hardware/software setup:
- raspb…
-
Hi Shay,
I noticed the Encoder listeec in the BOM for the DSO 150 Euro Scope is definitely no specific enough to identify which of the Mouser Part Numbers match what needs to be purchased. EC12E_S…
-
My rotary encoder does not work. However the push button works.
I can see the action of the push button in the debug serial output.
But when I rotate the encoder nothing comes out in the trace.
I…
-
The POH of a 1982 Model P which I have suggests rudder trim is an option, _apart_ from the manual rudder trim tab that can only be moved on the ground:
![image](https://user-images.githubuserconten…
-
Maybe it is my specific issue, but I've got rotary encoder (EC12 clone, 30 imp.), which either moves 1 position, every two clicks (simple), or skips by 2 positions (Gray). Actually - when Gray pattern…