-
```
不明白～～我是用https://dev.openwrt.org/ticket/9467这个makefile编译k
o的，但是不论用rg100还是x86平台（就算识别了双网卡）还是��
�down机然后自动重启，真的搞不定了……我说说都做过哪些实
践
===============================================
1、双网卡x86主机刷官方rc5，uname …
-
I tried to add the `python-pyaudio` folder to my openwrt source and compile it, then I received this error:
```
cp -fpR /home/vm/lede/build_dir/target-mips_24kc_musl/PyAudio-0.2.9/build/lib.linux2…
-
hello, i like this, but there no gnu compiler collection commands in any disk.
why want gcc?
because if you have not a command to use you to compile but there no gcc and g++ here, and compile in hos…
-
我用了此项目编译出的程序在路由器上认证锐捷, 过一段时间会出现只有ipv4而失去ipv6连接的情况, 同时用官方锐捷客户端认证一切均正常, 我用你的项目的代码半年了, 之前未出现这样的问题, 这学期才出现....
而且很诡异的时好时坏, 由于我用ipv6只上蝴蝶才用到, 蝴蝶重新开放后, 我出现过偶尔不能访问的情况, 以为是蝴蝶网站出问题了, 后来发现别人都可以正常访问....
现在的情况是路…
-
```
A command might do "gcc -c *.c". If a new file is added to that directory, it
should cause re-running the gcc command.
For the strace runner, this could be achieved by tracking 'getdents' and
s…
-
UPDATES (not part of proposal text):
1. 2023-02-25 - The license requirement description for third party derivative work was updated based on RFC comments.
----
## Summary / Motivation
A while b…
-
*dreieck:*
I suggest to enhance `opkg` so that with a command line option it can read the list of packages to operate on (e.g. install, remove) from a file or from standard input rather than from the…
-
```
What steps will reproduce the problem?
1. Try to make && make install on a BusyBox ARM System like a Synology
DiskStation
What is the expected output? What do you see instead?
Expected: complete…
-
# Steps to Reproduce
```
$ mkdir -p idristestprog
$ cd idristestprog
```
flake.nix
```nix
{
inputs = {
nixpkgs.url = "github:NixOS/nixpkgs";
flake-utils.url = "github:num…
-
SDL-idris 095ce70da7ea9f163b018b690105edf375f1befe
Idris 1.3.0
sdl_gfx 2.0.26
```
% idris --build sdl.ipkg …
LeifW updated
5 years ago