-
First of all I have an error with "Get Serial Ports". So I am not able to connect to the board. That issue has been reported https://github.com/pycom/pymakr-atom/issues/36 . Please can you fix that so…
-
Dear all,
unfortunately my ttbeam (new) is not joing with OTAA on thethingsnetwork. I guess it is related to an timing issue as I tried with an "normal" ardunio sketch for the ttbeam and this works…
-
Please include the following information when submitting a bug report:
* The Pycom board you are using (e.g. WiPy 2.0, LoPy).
**Lopy**
* The firmware version you are using. You can get it by ex…
-
The NetworkServer currently piggybacks the LinkADRReq on downlinks that are sent when the device requests an Ack/ADRAck or when the application sends a downlink. However, when neither of this happens,…
-
Fresh downloaded repository & updated esp-idf
Build for FiPy, device erased before flashing. Executing
```
import uos
uos.uname()
```
causes a core dump.
```
>>> import uos
>>> uos.uname()
(…
-
Building fails at load time (and yes: new compiler version, new esp-idf version) with the error:
```
LINK build/LOPY_868/release/application.elf
/home/robert/Downloads/xtensa-esp32-elf/bin/../lib/g…
-
Hello,
I've spotted an error in `LoRaMac.c`:
```c
LoRaMacStatus_t LoRaMacChannelManualAdd( uint8_t id, ChannelParams_t params )
{
[...]
if( ValueInRange( params.DrRange.Fields.Max,…
-
Boris,
I've found this useful information about pye module (I'm a python-newbie, and maybe this is kind of obvious, but...):
https://github.com/robert-hh/Micropython-Editor
Can you put this li…
-
If the input to set_item is of type list then it gets ignored in this driver. If that is intentional, then it needs to be clearly documented. In contrast, the dotstar driver will accept a tuple or a …
-
Everything compiles fine until it goes to build the image:
```
% cd esp32
% make BOARD=LOPY LORA_BAND=USE_BAND_915 TARGET=app
[snipped]
Building partitions from lib/partitions.csv...
IMAGE bui…