-
Board: ESP32-S3-WROOM-1
Arduino-ESP32: v4.4.1-1-gb8050b365e
After a day or so of TCP requests (sending temperature and getting temperature as a response) every ~10 minutes I get a "Guru Meditatio…
-
Hi Brian:
So I was able to compile the quiet-lwip correctly, but when I try to compile the examples, as noted on your wiki. I get this error? It's a Linker error actually.
mikek@mike-M6700:~/Doc…
-
Hello,
A beginner to C and ESP SDK here :)
I would like to see debug messages which can be helpful while getting to know how exactly TCP stack works. Thanks!
-
Both on RP2040 and RP2350, with Ninja or without this happens on Windows:
```
PICO_SDK_PATH is E:/Download/Pico_2/pico-sdk-2.0.0
Target board (PICO_BOARD) is 'pico2'.
Using board configuration fro…
-
I have already built the esp-open-sdk's toolchain , it looks fine.
When compiling the example's blinky, it's ok.
However when I tried to compile this repo `esp-open-lwip`,
it occurs some errors …
-
### Board
esp-wrover-kit
### Device Description
Devkit
### Hardware Configuration
Ethernet ( which is not used in this case ), i2c, SPI display, etc..
### Version
latest master (c…
-
Version: 5cd31c649a157d0635bf65e4b8551e955333bb72
I'm trying to scan for APs, and I'm getting a `fatal exception (28)`. The call to `sdk_wifi_station_scan` returns successful, but then I am getting …
-
Your code fails if the CONFIG_LWIP_CHECK_THREAD_SAFETY option is activated, because you do not use the thread-safe APIs.
I tried modifying the code by using the netifapi_netif_* functions to solve …
-
platform: `centos7`
```
esp82xx-nonos-linklayer]$ make -f Makefile.arduino install
make -f makefiles/Makefile.build-lwip2 \
target=arduino \
SDK=../.. \
…
-
Bill,
In 2016 I used a zip file from stepl https://forum.pjrc.com/threads/45647-k6x-LAN8720(A)-amp-lwip to test T3.6 SDHC with lwIP servers (httpd, ftpd, tftpd). Teensy 4.1 will have Ethernet, so I …