-
### What happened?
When I updated KlipperScreen it no longer showed me any of my printers. It has been working fine with the same 3 printers for over a year now, nothing has changed. I messed with …
-
I use the BTT PiTFT50 without problems.
After the update, i can see klipperscreen on the display, but touch did not work anymore.
I use MainsailOS 32bit Bullseye.
Klipper v0.11.0-128
Moonraker v0.…
-
**Describe the bug**
When booting up, the screen shows the typical linux boot up messages, then it gets to the login prompt and stops there.
**Logfile**
Attach your [klipperscreen.log](https://kl…
-
Hi,
On a recent new build of Raspberry Pi lite 32 I have successfully installed Kiauh, Klipper, Moonraker, and Mainsail and have them all working ok, but when I try to install Klipperscreen (either…
-
### What happened
updated to v4.0.2 last night, now I get the above error in my logs and no camera picture. This setup worked just fine until before the update to 4.0.2 (v3.0.7-3-g20ed6a8 being the…
-
Couple of hours ago I have updated to v0.10.0.571 and my Klipper stopped connecting to the mcu.
This was a new installation done yesterday with mainsail os and updated via kiauh, then everything …
-
Mainsailos looses wifi after a while, top shows nothing out of the ordinary, free show nothing either.
If i reconnect the ip in unifi it comes back.
Rasberry pi 4 8Gb
klipper
v0.9.1-627-g121052ad
…
-
### The problem
Some devices are experiencing problems with device trackers. The symptoms are the following:
- Device trackers might switch to `home`, but never to `away`
- Device trackers might …
-
### Is your feature request related to a problem? Please describe
Im not sure, due to my limited understanding of the issue. My request is i remember earlier in the year that the Arducam was not supp…
-
**Describe the bug**
A clear and concise description of what the bug is.
Updated via clean install to 1.0 and 1.0.1 mainsailos and with both versions once klipperscreen is installed touch is inopera…