-
Hi Jose,
With your firmware we have achieved to bring into Apple's Home app our devices and control them. Moreover, we have started to minimize the need for middle man devices (like i.e. a raspbe…
-
to avoid continuous switching on and off it is possible to insert a temperature difference between the measured temperature and the set temperature?
If the temperature read is less than the set temp…
-
Hi, first of all thank you for the great software! After flashing and selecting the SSID and password and then waiting 10 minutes or more, my Sonoff Basic never connects to my home WiFi. I can’t add…
-
Tried to erase my Sonoff Basic and reflash to new 0.5.11 firmware.
No success at all!
After 1st reboot i connected to WiFi LCM-B507XXX... DHCP doesn't work.
IP shown in prefernces is 169.254.74.23 …
-
Hi,
I would ask to implement a new type of device type compatibile with roomba irobot to implement these features:
- schedule start to clean in the time (not all roomba robot have it)
- know stat…
-
Good Morning!
Will be possible to use the new RX port in combination with GPIO 2/14 for multiple uses? This is, use the RX port for external toggle and GPIO2/14 for ( for example) temperature and h…
-
I have a Sonoff TH working as I want, but I set it up and tested it in one "home" and now I want to move it to another, on another wifi.
I have attempted to follow the reset procedure of holding t…
-
Hi
I've read the wiki, but did not find any answer to my question.
I am currently using a different homekit software on my sonoff basics but missing the following function.
Is it possible to …
-
I can flash the firmware to a Shelly 1 successfully as described in the Wiki, even configure the device as type "Shelly 1" with the virtual accessory in the Eve App. All this is done while powering th…
-
una pregunta, el ravencore 0.4.6 vale para el sonoff touch switch de dos pulsadores?