-
I understand that this project is only an experiment, but its code is barely readable.
ghost updated
6 years ago
-
I try to decode the stream using standard DVB-S receiver ... but when i search the channel the receiver don't found my modulation ... i use the LNA at 9750 I try to check the modulation with HackRF an…
-
Hi, would you mind add CW modulation support ?
-
how to transmit in am mode?
any idea?
-
I have been trying to make rpitx. All is good with scripts, rtl menu and test menu, However pocsag and pichirp will not make. I may be missing something but can not see what. I used ./install.sh with …
ghost updated
5 years ago
-
Converted a capture file to 48K mono audio file using audacity. Tried saving at all bit rates. Regardless I see the message, "Input rate must be 48K". What am I missing? Thanks.
-
Hi, what kind of file is dcfpatern.bin required by pidcf77 ?
-
So, I'm trying to make a short-range FM audio transmitter to play music in my car. I've gotten everything set up and working, and it can broadcast a pretty powerful FM signal. I'm using an RTL-SDR on …
-
I raised this in the discussion on distorted signals, but I though it was worth cross-posting here to bring it to the attention of the developer(s).
Using the dev branch on a RPi 2 - I used SpectrumS…
-
Please can you help me.
I installed WsprryPi yesterday and every time I try and run a transmission this is what I get:
sudo ./wspr --repeat --offset --self-calibration ZS6RAS KG44 20 40m
WSPR…