-
See these forum posts for details:
https://forum.sparkfun.com/viewtopic.php?p=222428#p222428
https://forum.sparkfun.com/viewtopic.php?p=221750#p221750
Background:
The power-on delay for the SCD3…
-
Similar to this PR:
https://github.com/adafruit/Adafruit_SCD30/pull/5
Since the SCD30 is a "true" CO2 sensor and not an "estimated".
-
While I was working on a PR for this repo, I noticed that the first read after each save (and thus reload) was giving good temperature and humidity, but 0 as the CO2 reading. (CLUE running 6.1.0) Not …
-
Please add our new library to the library manager:
https://github.com/adafruit/Adafruit_SCD30
Thanks!
-
Re this thread:
https://forums.adafruit.com/viewtopic.php?f=19&t=175010
I've recreated same behavior on QT PY:
![Screenshot from 2021-02-05 13-55-03](https://user-images.githubusercontent.com/875…
-
Please add https://github.com/mcci-catena/MCCI_Catena_SCD30 as an official library, thanks!
-
El formato que soporta actualmente es de la siguiente forma, @danielbernalb nos puede explicar ¿por qué usar este formato? y ¿qué tan genérico es?
16:56:54.009 -> Start SenseAir S8 lecture
16:56:5…
-
Ich hab gerade mal die 2.0.0 gebaut und habe nun das komische Verhalten, dass die CO2 Ampel erst "startet", wenn ich den Serial Monitor in der Arduino IDE anschalte. An einer Powerbank oder am PC ohne…
-
Step 4 simply states "Connect the SCD30 module to the proto module. We used headers."
I would really like to build this project, however its hard to make out which connections to solder and what to…
-
Current issue is that Most drivers are written in C and not in Python.
The following sensors need investingation into driver possibilities.
- svm30 (Sensor Bridge)
- scd30 (Sensor Bridge)
- sps3…