-
Here's what I did:
To begin, directory only contains `STM32Learning.ioc`
- run `init`
- edit the `board = ` field in `stm32pio.ini`
- run `new`
Error: ` FileNotFoundError: [WinError 2] The …
-
Hi Pycom team,
I can successfully build v1.20.2.r4 from source, but got runtime error.
* Pygate + Gpy
* v1.20.2.r4
I build the r4 from source by:
```bash
make BOARD=GPY BTYPE=release VARIA…
-
Error Message for command 'make BOARD=LOPY4':
```
fatal: not a git repository: '/home/gsbwallace1996/pycom-esp-idf/.git'
Incompatible IDF git hash:
c61fe64 is expected from IDF_HASH from Mak…
-
[LoRaWAN](https://github.com/Atos-Research-and-Innovation/IoTagent-LoRaWAN) and [OPC-UA](https://github.com/Engineering-Research-and-Development/iotagent-opcua) already use ES6 and are linted using [E…
-
When mirroring the OpenShift OperatorHub to Harbor 2.2, Nginx fails with the following error
```
414 Request-URI Too Large414 Request-URI Too Largenginx
```
Follows a sample push command logged …
m4r1k updated
3 years ago
-
# Problem/Motivation
after add line "5013" in traccar.xml the port is still not open.
addon restarted / hass restarted / port checked over docker and netstat
Can you help?
Thanks
-
Hi there,
While trying to make frozen bytecode for an ESP32 device, I ran into the following error:
xtensa-esp32-elf-gcc: error: unrecognized command line option '-mfix-esp32-psram-cache-issue'
…
-
I came across an old forum thread on pycom where you explained how to get pycom firmware working on a generic esp32. It looks like the wipy.bin file you referenced is no longer part of this repo -- ju…
-
When a bluetooth measurement is made, it's likely that that measurement time is used as a basis for the next poll - but if the Blue device does not take this into account, one poll interval will be ou…
-
Hello,
I instal the sigfox message location in MacOS Sierra 10.12 without problems.
I am running gdm with no problem and also searching for a device work , but i cannot see the location image and…