-
Hello,
i`m trying to run aprs igate on DollaTek LoRa32 V2.1 433 MHz ESP32, but i have one issue.
igate doesnt receive any data.
Beacon is working fine
when i tryed another (digipeater only) sw, r…
-
FEATURE PROPOSAL
It happens that the node shows other nodes reference in the mesh such as distance, bearing, signal regardless the fact that the other nodes are actually active just relaying on the l…
-
It will be nice to have support in RadioLib POCSAG protocol
https://www.raveon.com/pdfiles/AN142(POCSAG).pdf
https://habr.com/en/post/438906/
examples sound recorded POCSAG:
https://www.sigidwik…
-
Hello, I switched to Unbutu. Now I can build the image without any error. But the Images don‘t work on the esp. I tried almost every Board. It is rebooting all the time. I tried M5Stack Core 2, ESP32…
-
### Category
Other
### Hardware
T-Lora v1, T-Lora v1.3, Heltec v1, Heltec v2, Heltec v2.1
### Firmware Version
1.3+
### Description
Me and @thebentern worked to add is_always_powe…
-
What kind of issue is this?
- [ ] **Question**.
This issue tracker is not the place for questions. If you want to ask how to do something,
or to understand why something isn't working…
-
### Category
Other
### Hardware
T-Beam 0.7
### Firmware Version
1.3.25.4de6d5bd-d
### Description
Hi All!
Trying to get things running on the bare minimum I could get, which is…
-
I run I2c_read_mulitple_circuits.ino (with little modifications) with no issues but when adding an OLED display on the same I2C bus readings are 0.
The library I use [U8g2](https://github.com/olikra…
-
Hi all,
Im trying to make a microSD card to work but im not being able.
I have the following boards:
ESP-WROOM-32: http://www.ebay.com.au/itm/262953936783
Micro SD shield #1: http://www.ebay…
-
we've got the 5V MEGA controlling most everything on the MO-RA3, but we'll need the ESP32 to get the communication back to the main workstation. this means we need pass data back and forth between the…