-
ToDo : Setup FreeRTOS Application on Code Composer Studio for Board Tiva TM4C1294xl.
DoD: To integtrate both the sensor projects successfully in one FreeRTOS application and Configure their UART 3…
-
TODO: 1.Interface Ultrasonic sensor to Tiva Board
2.Interface Motor to Tiva Board for implementing feedback system(which can be controlled by beaglebone)
DoD: Get proper o…
-
PIO Core Call Error: "\u001b[1mLibrary Storage: \u001b[0m\u001b[34mC:\\Users\\berna\\.platformio\\lib\u001b[0m\nUpdating \u001b[36mSSD1306\u001b[0m @ 2.1.1 \n[\u001b[3…
-
TODO: Sensor to be decided depending on the availability due to COVID 19.
DoD: Check the workability of the Fingerprint sensor GT-521F32, Hardware setup with TIVA board Enroll the fingerprint on …
-
TODO:Enable UART communication on Beaglebone and TIVA separately.
Successful Setup of FreeRTOS on TIVA and Set-up FreeRTOS Demo project, and tested LED code.
-
PIO Core Call Error: "Library Storage: /home/mslos/.platformio/lib\nLibraryManager: Installing id=2096 @ ^0.3.3\nesphomelib @ 0.3.5 has been successfully installed!\nInstalling dependencies\nLooking f…
-
Take data obtained from #2 #3 to implement UART communication between the two boards and have syslog check this.
**DoD**: Data sent by both boards received by other board
-
ToDo: Make sure that the individual elements of the project work in synchronization
DoD: All the tiva clients are able to successfully communicate with the beaglebone server and the server is then …
-
-
TODO: Implement simple message queue on TIVA board in order to send Ultrasonic sensor data to Beaglebone later.
DoD: Successful implementation of message queues