-
I was configuring the library in the Arduino IDE and trying to configure the wifi with a code I found on youtube with the T4 connected to my notebook and the board turned off and doesn't turn on anymo…
-
In example code ttn-abp, I get error in subject at line
os_setTimedCallback(&sendjob, os_getTime()+sec2osticks(TX_INTERVAL), do_send);
The board is TTGO LoRa32. What can I do?
-
Hi, we are trying to use 868 MHz MHz SX1276 ESP32 Lora to send message to gateway installed in a raspberrypi with Draguino. The gateway reconize the transeiver and work fine. The problem appears when …
-
Hello my brother, I was wondering if it is possible to add support for ESP32 boards. I tried the code as it is in a TTGO, an ESP32 based board but it looks like the WIFI libary is not compatible. I am…
-
Hi!
Happy new year!
What gps library for ttgo-beam?
what code in replacement please?
makes conflicts.
Thanks
jeda9 updated
5 years ago
-
Hello,
I'm trying to improve the battery lifetime of my TWatch2020 by playing with **deepsleep**/**Hybernate** mode.
The problem is **ttgo->begin();** tooks about llllooonnnggggg 2s to run, and I'…
-
I have seen a wrong pinmap in the image in this repository. The Pinmap image shows ` GPIO2, GND, 5V ` and the Schematics 1in6 on Repository [../TTGO-LoRa32/schematic1in6.pdf](LilyGo/TTGO-LoRa32/schem…
-
Can someone add some pictures of the Boards?
I do have two versions of TTGO T-beam one with a mechanical switch and one with a single press switch.
Don´t really know which one is which....
Tha…
-
Having a weird issue where, if my ESP32 looses power, and I give it power again it wont connect to the saved network. If I turn it off and back on again it will connect. It almost as if it will only c…
-
On my **T-Watch S3**, I am putting the ESP32 into [light sleep mode](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/system/sleep_modes.html#id1) and turn down the display br…