-
Hi again;
Do you know how the write_data() function can be modified to work with hardware SPI (ESP32) which does not have primitive I2C start() and i2c.stop() functions ?
I have tried just self.…
-
I know this is a big one, but it's really the critical thing when using battery power.
Is this on the near horizon ??
-
Two small changes to make it work on ESP8266 (WeMos D1 Mini):
1. struct not found, ustruct works though
```
try:
import struct
except:
import ustruct as struct
```
1. spi.init() works differe…
-
I believe I've stumbled across an issue in the I2C readmem_into implementation on the Wipy 1.
Here:
https://github.com/micropython/micropython/blob/master/cc3200/mods/pybi2c.c#L276-L281
the ret…
hoihu updated
7 years ago
-
Hello,
Using a LoPy connected through a Pysense board, once the REPL prompt over serial is reached, the connection stops after a few seconds and Pymakr console outputs the following error:
```
> …
-
Hi,
Now we have the modules
"machine" which as written in the docs contains - functions related to the board
and we have a special modules e.g.
"esp" - functions related to the ESP8266
"wipy" - W…
-
My Lopy is setup to read sensor values and print them in a loop.
Apparently this hinders the REPL console from recognizing the password option.
![timeout](https://cloud.githubusercontent.com/asset…
-
I just installed Atom + the new Pymakr Plugin. Connection to the WiPy 2.0 module was successful but the command prompt is outside of the console area. I use Windows 8.1 x64 and my screen has a resolut…
-
As mentioned and shown at https://github.com/micropython/micropython/issues/2578#issuecomment-257260417, pyboard docs inconsistent wrt to other port docs in that they put 3 headings of this doc: http:…
-
We need a standard way of using internet modules on the pyboard that is powerful, extensible and easy to use. Powerful means being able to attach an ethernet and wifi module at the same time (and pos…