-
JTDX is a derivative of WSJT-X and can send similar status, decode, heartbeat messages over UDP.
The current version throws the following error on decoding.
```
Dec 19 12:46:17 raspberrypi Nod…
-
So after running WSJT-X, and closing it down, and then trying to run YAAC, errors pop up with receiving information from the web server, and the grid map doesn’t update. Also, then trying to go back i…
-
**Describe the bug**
I think that the udev rule that would detect PlutoSDR devices is broken in the Raspberry PI SD image, so that those devices aren't usable by non-root users.
**To Reproduce**
…
g4wsz updated
2 years ago
-
InvalidValueError: at index 0: not a LatLng js?key=AIzaSyDSTJMwyUK9K5Vd0I1MWtg2Gb14DylAhpE:66 InvalidValueError: at index 0: not a LatLng or LatLngLiteral with finite coordinates: in property lat: not…
-
When running WSJT-X with FT-991a it passes CAT TEST and PTT Test however when operating the radio and monitoring the serial port, I see MD1; command sent to the device. This command is not a valid CA…
-
TR4W should use the multi-cast protocol for the WSJT-X UDP socket, but until that point (or if that is not set by all programs), handle the case where TR4W cannot bind to the UDP socket for WSJT-X. Ri…
-
Based on certain settings in WSJT-X, there can be extra data on the CQ line. This has to do with the 'Decode..Enable AP ' option in WSJT-X. An example is:
```
214045 -21 0.2 584 ~ CQ HI8JSG FK58…
-
If the band is changed from say 80m -> 20m or vice versa then the sideband detection will show up in red unless there is a modem start/stop cycle. It does not update even on PTT activity. It would be …
-
Raspberry Pi Foundation released a 64 bit Raspbian image. See if it can be supported.
-
QT GUI app needs a display to start.
Starting it with various "platform" options (eg. ./x6100_ui_v100 --platform offscreen or vnc ) does not work properly.
Without recompiling it is not going to w…
djbr1 updated
2 years ago