-
cogfun-pose is so powerful
if we can just put in for start_img like i2v it will be game changer
because normal 12v it so random i had to gen like 20 for only 1 use.
but today i try cogfun-pose …
-
The calculated power consumption of 12V WS2815 is off by 100%. 300 physical LEDs result in 48W, when it should be 90W. Any WS2815 strip i checked online stated 0,3W/Led or 90W/strip for 60Leds/m.
Pl…
xrtze updated
4 months ago
-
Hi. I'm not sure if this is the place to report problems with the website frontend but I don't see any other options. The tool seems to be "over suggesting" tools for the attributes I'm entering. F…
-
Hello, according to specs there is SPX3819 power stabilizer at the voltage input, also the filter capacitor is rated at 16V. When I connected the node to car battery 12V it seems that something is bur…
-
Hi, I have successfully compiled the code and made a at070tn90 lcd work with pcb800099 board, my issue is I can not make the ACC trigger work which changes the input source to AV1 or AV2 when power (l…
-
Can you please provide the current specification for each rail +=5V, +-12V when used PicoPSU 80W ?
So my Apple 2 clone requires +12V @ 2.5A.
-
### A clear and concise description of what the problem is.
Hello,
I would like to ask for your help in connecting my EASUN SMH-II-2.2 KW, 12V with an Wifi adapter that was received in the box to …
-
-Create a new layout for the PCB that fits our new layout
-Determine if current board design sufficiently outputs required power
-Look into options of viewing power draw and temp.
-Consider efficiency…
-
I notice in your technical specification you require 12v. Now since you don't have a schematic yet I can't say for sure how your powering the controller. However, As someone who builds hundreds of cus…
knabe updated
4 years ago
-
As a power source for the Raspberry Pi I will be using one of these [fuse adapters](https://nl.aliexpress.com/item/32891479646.html?spm=a2g0s.9042311.0.0.2fa24c4dkxyR1F) which will feed [this 5V power…