-
https://github.com/analogdevicesinc/libad9361-iio/blob/93d4a2286dc599f6c73c7310257ef5b67f25bc38/ad9361_calculate_rf_clock_chain.c#L22
-
Do you mean FORCE_VCO_TUNE_ENABLE, instead FORCE_VCO_TUNE?
https://github.com/analogdevicesinc/no-OS/blob/07649246bd8b7d15a7e21a7a4b0fcc602ec9c636/drivers/rf-transceiver/ad9361/ad9361.c#L5157
…
-
Hi,
I'm sorry to ask here, but I found very few information on this Zynq 7020 / AD9361 SDR on the web.
Could you tell me if it works with [srsRAN](https://github.com/jsroldan/srsRAN) ? srsRan suppo…
-
Hi
How i can turn on ethernet on sparsdr?
-
question:I run the Capture RF Data to Baseband File Using ADALM-PLUTO Radio example with matlab 2022b
configurePlutoRadio('AD9364') is error "Reference to a field that does not exist 'SerialNum' "
!…
-
The rf_bandwidth cannot be set to any value, and the driver correctly recalculates it based on the current BBPLL and available dividers. However, this is not written back to the actual struct which is…
-
It seems that the ad9361-phy,xo_correction attribute isn't used to correctly tune the RX LO, the frequency always seems to be out by a couple hundred Hz...
Might also be only a badly configured XO…
-
Hi @mhennerich @tfcollins
I have a similar problem to the one in this thread. When i tried to use an external GPS clock with 40MHz output, and injected it to the pluto's CLK_IN and changed the xo…
-
https://www.nuand.com/2023-02-release-122-88mhz-bandwidth/
https://destevez.net/2023/02/running-the-ad9361-at-122-88-msps/
It would probably be better to operate in 1T1R to use the same data clk r…
-
Link time optimization is increasingly common across linux distros, but this fails to build on gentoo when lto is enabled.
I would expect this is easy to replicate with `CFLAGS=-flto -Werror=odr -W…