-
Hi, there is a pretty big problem with the current versions,
It's impossible to chose a frequency above 2.17GHz
Since a lot of SDRs are capable of going higher than that (Eg: hackrf, limesdr, adal…
-
Thanks for your work on this, having trouble trying to run from the connected device and also natively.
**On Device**
```./retrogram-plutosdr.arm --rate 5e6 --bw 5e6 --freq 100e6 --step 1e6 --…
-
Hi
I ran leaniiorx, then got following error.
% ./leaniiorx -f 2395e6 --bw 2000e3 -v
Setting RF bandwidth 2000 kHz
** IIO: in_voltage_sampling_frequency failed with Unknown error -…
-
question:I run the Capture RF Data to Baseband File Using ADALM-PLUTO Radio example with matlab 2022b
configurePlutoRadio('AD9364') is error "Reference to a field that does not exist 'SerialNum' "
!…
-
... doesn't work at the moment. I don't know why.
use "ip:192.168.2.1" for now.
-
I have already installed the fpga bitstream to a pluto adalm v0.34, and compiled the srsenb, and set cpu scaling to performance. But when starting srsenb I get an error when trying to create the TX bu…
-
On ADALM-PLUTO, with 2r2t mod, the dds_dual_tone() function sometimes generates a tone on the wrong channel.
With this code, it can be demonstrated on a dual-channel PLUTO with cables looping back …
-
I recognised that TX always enabled , on PS_MI00 are always 1,8v , probably FW fault or?
pls assist
Sergey
-
**Please Describe the problem to be solved**
I am having several networked SDRs like Adalm pluto and SDRplay TCP servers , that I would like to utilise remotely on a more powerful system than an rpi …
-
Current "Make gen-boot-load" fails. Probably there is a problem in the order of the commands. If I run them individually in pluto, after uploading the bitstream to /lib/firmware I get:
$ cd /lib/…