-
Hey there! I have a project where I'll need to use an ADS1110 inside of an `embassy` based project.
I'll certainly base my work off of this crate, but I'm not sure the best way of supporting both s…
-
In the file "ADS1115.cpp" is a `Wire.flush()`.
Can you tell me what you want the Wire.flush() to do ?
I wrote an issue here: https://github.com/arendst/Sonoff-Tasmota/issues/6363
The `Wire.fl…
-
In case, when a range of measuring is set as RANGE_6_144V, and I try to measure 5v, I got ~4.8v instead of 5v.
-
Hi,
How hard would it be to change the code for the ADS1015 and make it the ADS1115. I'm thinking possibly just a find and replace 1015 with 1115 should do the trick?
Any thoughts on this?
-
Here is the YAML to enable this board to work in ESPhome. You will need to change the filters when you calibrate your own STC
```
i2c:
sda: 4
scl: 5
scan: true
ads1115:
- address: 0…
-
I reproduced the project and do not get a text with the values from arduino and ADS1115 as desired.
Does anyone her facing the same problem ?
-
I did get it to work, by rewriting the emonlib library, but it was crontoversly to say at least. But it works perfectly, it still is measuring the current.
The reason I used the ADS1115 was indeed t…
-
The Arduino "new" operator doesn't support parameters to constructors. I run a simple factory at startup, creating as many ADS1115 objects as needed for my current project. I plan to expand the fact…
-
The ADC1115 and ADS114 have a pin called ALERT/RDY which is active while the conversion is performed. This is more reliable and preferred when the pin is available to the SoC.
Currently the drive…
-
Setting an interrupt on the alert pin with an appropriate callback function, and calling `startread()` with no callback results in an error.
```
> adc:startread()
Lua error: stdin:1: bad argumen…