-
### Describe the bug
Adding the following to /etc/config/wireless causes radio initialisation to fail without any obvious error message:
option txantenna '1'
2.4G Radio doesn't appear to send o…
-
### Describe the bug
The flash driver is unable to erase or write the flash chip.
The Rocket was sold with two different flash memories and mine had a slow memory installed.
With the software v…
-
### Describe the bug
eth0 mac address changes randomly on every reboot
wlan mac address is different from stock firmware
### OpenWrt version
r26181-d1504a1e76
### OpenWrt release
SNAPSHOT
### O…
-
### Describe the bug
I have a few [Unifi AP-LR](https://openwrt.org/toh/ubiquiti/unifi_ap) running OEM firmware which is a nightmare to reconfigure. I wanted to flash one with OpenWRT as i have so …
-
### Describe the bug
The initramfs boots correctly but once the image gets flashed on the device it doesn't boot anymore. The issue involves the last OpenWRT 23.05.0-rc2 and the last stable 22.03.5…
-
in writing the EFM32 HAL, I sometimes end up implementing an abstract peripheral in unsafe Rust, where I take a register the I don't actually have a mutable reference to, modify that register. The uns…
-
Hi all,
I need to debug LPC1768 in MKS SBASE v1.3; my origin target was to debug Marlin 2.0. OS is Windows 10 Pro 64bit. I'm using the older original SEGGER version of J-Link Lite. I'm able to connec…
-
@lynxis
I use Mikrotik wAP R AC with R11e-LTE modem, also tested with R11e-LTE6 modem. The log is full of:
```Thu Dec 1 00:54:45 2022 kern.err kernel: [ 177.542160] usb usb2-port1: Cannot enabl…
-
### What target platforms are you seeing this bug on?
Android
### Steps to reproduce
1. Enable Impeller on Android
` `
2. Use native views directly or through plugin
### Expected res…
-
**Description of the problem (how to configure, how to reproduce, how often it happens).**
On a QCA9563+9886 device (https://github.com/openwrt/openwrt/pull/16242 ), the board-2.bin is not loaded
…