-
Hi all,
I'm getting this error when I'm using onchip_memory_2.0 and trying to create the BSP in Eclipse.
SEVERE: [Error] altera_hal_linkerx_generator: Required linker section mappings do not exi…
-
这个路由器和新路由3配置差不多,能否适配一下呢
ddvcx updated
4 years ago
-
I've beeen trying to narrow this issue down for months now, but it's so weird, really don't know what to do further. Already tried disabling LED blinking, but that didn't seem to help much.
Sometim…
-
#
# Automatically generated file; DO NOT EDIT.
# Linux/mips 3.4.113 Kernel Configuration
#
CONFIG_MIPS=y
#
# Machine selection
#
# CONFIG_RALINK_RT3052 is not set
# CONFIG_RALINK_RT3352 is …
-
The irresistable draw of the MeCrisp family is the large installed base, and the promise that many of those implemented peripherals will also work on Mecrisp-Ice. The problem is that I do not know wh…
-
Do you want access to the Fossil repository? Maybe this could be kept on a branch, of course that is up to you what you prefer! :-)
-
Is the "new" Usb-BlasterII cable also supported ?
I get the error "No UART matching the specified device/instance"
-
Hi,
I'm having problems with spike concerning spike_dev.spi_device.
Everytime I read spike device with cat /dev/spike, it returns me an error because of spike_dev.spi_device being NULL.
Do you know …
-
### What happened?
After upgrading my VM (Ubuntu 22.04 / amd64) to the latest available kernel (`5.15.0-1023-aws` and `5.15.0-1022-gcp`), service probes stopped working. I checked older versions of…
-
As discussed on ##linux-surface, hardware buttons on some Surfaces are not working. Reloading the button module works post-boot:
```
sudo modprobe -r soc_button_array
sudo modprobe soc_button_array…