-
### The problem
hi i have had no issues before but i bought a month or so ago and returned them the am2302 thermometers... and i just got one today... and it does it again.. when the temp gets …
-
Despite proper configuration of the plugin it's not able to show any readings from DHT22 properly connected and working.
![image](https://user-images.githubusercontent.com/72738177/121865791-a52e…
-
### The problem
My pi pico w isn't getting data from a DHT22. If I put micropython on the pi pico w, it reads the sensor as expected.
This is on ESPHome 2023.6.2
### Which version of ESPHome…
-
**Describe the bug**
My DHT11 was working… then it wasn't. I note that https://github.com/adafruit/Adafruit_Python_DHT is now marked as deprecated, and they point to CircuitPython as the successor. I…
-
```
Humidity: 30.4% Temperature: 0.2°C
Humidity: 30.0% Temperature: 0.2°C
Humidity: 29.7% Temperature: 0.2°C
Humidity: 29.5% Temperature: 0.2°C
Humidity: 29.3% Temperature: 0.1°C
Humidity: 29.2%…
-
I have built the Multisensor with a DHT22 and NodeMCU along with the TEMT6000 & AM312 PIR.
I'm using the same Pinouts as the Multisensor Video shows.
I've flashed this a couple of times using the e…
-
Up to now there is a lack of documentation of the wiring and setup of the gpio. Only the hall sensors are explicitly defined. That means e.g. the temp/humidity sensor of ardadfruit is taking the defau…
gisma updated
4 years ago
-
- Arduino board 1: ESP8266 / NodeMCU 1.0 (ESP12-E Module)
- Arduino board 2: ESP-WROOM-32 / ESP32 DEVKIT V1
- Arduino IDE version (found in Arduino -> About Arduino menu): 1.8.13
- installed DHT-se…
-
Bonjour,
Pour utiliser les sondes de températures DS18B20, il faut passer les lignes suivantes (tiré du site Adafruit 'https://learn.adafruit.com/adafruits-raspberry-pi-lesson-11-ds18b20-temperature-…
-
Hi guys and girls,
This lib needs people with some spare time and Arduino hardware to help test it. Comments are welcome
Cheers!
ADiea updated
8 years ago