-
**Is your feature request related to a problem? Please describe.**
Is it possible to increase the non long for indexing headword size?
There is a huge number of 1xx size headwords (at least in [ZIM …
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Set `#define ANYCUBIC_KOSSEL_ENABLE_BED` to **0** (**2** is default) leads to the part …
-
The maximum build dimensions seem to be calculated incorrectly on my delta printer (Arm length ~270mm, delta radius 149mm, build radius 120mm).
It claims that the max. build height is 239.86 mm(whi…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Baby stepping wont work unless you stick to standard values in config.
#define BABYSTEP_MI…
-
### Description of the bug
With Arachne engine, I have (again #8511 #8534 ) a lot of short extrusions. No problem with classic.
### Project file & How to reproduce
[contenitor.zip](https://github.c…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
MKS TINYBEE Kossel Linear Plus TMC2209 x4 Marlin 2.1.x fixbug Layer Shift
LayerShift 75% …
-
The bed size of the Kossel Linear Plus is 229mm and not 240mm or 239mm as it should be.
-
The print quality that I'm getting from Prusa Slicer in my Anycubic Kossel Linear Plus is so much better than the print quality I'm getting on CURA. But Cura calculate all the line sizes for change in…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
This issue has already been reported in 2019 as issue #13300, but apparently still exis…
-
Marlin 2.1.x bugfix have bug surface move on delta it curve like palabolic cant print
am use mainboard MKS TINYBEE and test on marlin 2.1.x bugfix cant print because have bug move axis x and y cur…