-
Hi,
I cannot find any way to create trunk groups other then running the arubaoss_config module and shoot lines via ssh - is that maybe a restriction that comes from the API?
It would be really us…
-
Hi,
tested with latest aoscx collection version and latest pyaoscx:
- arubanetworks.aoscx 4.4.0
- pyaoscx 2.6.0 AOS-CX Python Modules
```
- name: Add ACL tas…
git4m updated
5 months ago
-
## Expected Behavior
For other brands of switches Netdisco nicely displays the IP's for each MAC-address node on the ports tab.
## Current Behavior
No IP-adresses for the connected nodes are show…
-
##### SUMMARY
When trying to write the configuration on Aruba 2930F, it fails with the following message:
```
ansible-playbook -i hosts examples.yml -k
SSH password:
PLAY [switch01] *****…
-
I've never managed to get the aoscx_upload_firmware module to work in my environment, despite trying on various AOS-CX firmware versions.
Switch: 6200F
Firmware: ML.10.13.0005
This is the error…
-
-
In iPic3D, pushing of fast-moving particles is unstable, which can lean to runaway particles, which in turn can cause the entire simulation to blow up.
This instability results from a combination of …
-
Hello,
i found an issue with getting the MAC addresses if a VRRP is configured and i would consider this as a bug. This is also used in other modules for example when getting a VLAN via `VLAN.get(s…
-
Hi,
the above mentioned modules are the ones that I use for 2540 switch from your collection aos-switch-ansible. I was hoping that I can more or less do the same with this collection. is there a rea…
-
On this config:
interface 1/1/9
description In trunk mode, native vlan 777, all allowed
no shutdown
vlan trunk native 777
vlan trunk allowed all
exit
SNMP driver cannot…