-
I've been working with 1024 APA102 leds (or maybe SK9822, not exactly sure) and realized that it's not stable until I use 6mhz.
Looking into this I saw this post about the click signal being trunca…
-
Error:(38, 13) Failed to resolve: com.google.android.things.contrib:driver-apa102:0.3
Install Repository and sync projectShow in FileShow in Project Structure dialog
-
### CircuitPython version
```python
Adafruit CircuitPython 9.0.5, gemma m0
```
### Code/REPL
```python
from board import APA102_MOSI, APA102_SCK
```
### Behavior
Unable to find import, though c…
-
Hi
I have trying to run APA102 on my ItsyBitsy nRF52840 Express board and custom nRF52840 BBoard but no success
I have 104 LEDs (4x26) and trying to get it working but code continue after 52 eve…
-
APA102 LED has a high defective rate now, I am troubled with many defects. Someone sent me an email about HD107S, it says it can replace APA102, anyone tried it?
-
The connection points don't meet up with the leads and when you connect a lead to the LED, it doesn't carry over to the board.
myk3y updated
8 years ago
-
Both visuals Twinkle and Noise make 8x8 frame w/ APA102 LED crash.
-
Hello,
Since the “Adafruit ItsyBitsy RP2040” is mentioned as a one lane output, would “HyperSerialPico_Spi.uf2” work on “Adafruit ItsyBitsy RP2040”, with the DATA on GPIO 3 and CLOCK on GPIO 2 with t…
-
apa102 module is not available in firmware.
Uploading a generic Dotstar driver (https://github.com/RobertJBabb/micropython_generic_apa102/blob/master/generic_dotstar.py) allows the LED to be access…
-
### What happened?
When using analog PWM signals from the ESP32, the board is fine for a while but within 5min to 2 hours the LEDs 'glitch' and don't recover until a reboot (or sometimes turning th…