-
Hi. I use Go2rtc in Frigate in a docker container on a Raspberry Pi 5 with host networking mode.
Go2rtc is installed by and part of the Frigate package.
This is Go2RTC 1.9.2
I added a camera from…
-
### The problem
I need to define a sensor.window into HomeKit. There is a type of Window in HomeKit, but this is not listed as a supported accessory. https://developer.apple.com/documentation/homekit…
-
**Have you read the [FAQ](https://github.com/potmat/homebridge-google-nest-sdm#faq)?**
Yes
**Have you searched [existing issues](https://github.com/potmat/homebridge-google-nest-sdm/issues?q=is%…
-
### The problem
I have been using 6 Onvis CT3 sensors for a year now. In the past, I was able to add the devices to Home Assistant in the following way. First, I added the sensors to Apple Home via t…
-
Apple just recently open homekit protocol for non-commercial version.
https://developer.apple.com/support/homekit-accessory-protocol/
a good reference repo https://github.com/aanon4/HomeKit
-
I have my Aqara G4 doorbell in Apple Home through go2rtc, I have enabled recording on any movement (in HomeKit secure video), but nothing was recorded till now (a few hours using).
Is HKSV really s…
-
### The problem
I cannot provision the preferred thread credentials to a Nanoleaf Essentials Homekit Lightstrip (NL55). Steps to reproduce:
1. delete device, restart HA, run "Recorder: Purge entitie…
-
Not sure if the “temperatureDisplayUnits”: “F”, works correctly. I set it as above, but my display in Apple HomeKit (and under accessories on HomeBridge) shows 30°C.
![IMG_3366](https://github.com/ki…
-
### Describe the problem you are having
I am using [HomeKit module from go2rtc](https://github.com/AlexxIT/go2rtc?tab=readme-ov-file#module-homekit) and am able to pair cameras and view them in App…
-
Hello. I am pretty new to HASS and go2rtc, so if you need additional information, please ask.
I have 2 Aqara cameras, G2H and a G4 doorbell. Configuring the streams was simple, and the config param…