-
When APRS LocationInfo is enabled and the internet goes out, svxlink crashes.
Symptoms to reproduce:
1. enable LocationInfo
2. Disconnect internet
3. Reboot (no IP addresses on any interface)
4…
-
I assume you wanted to write:
- SEND **OUT** BEACON TO APRS-IS or
- SEND BEACON TO APRS-IS
-
APRS, and what it is:
https://en.wikipedia.org/wiki/Automatic_Packet_Reporting_System
These links are provided as examples of software:
Here is an open source client:
https://www.ka2ddo.org/ka…
-
Hey.
I have two TTGO T-Beam V1 (433MHz SX1278) boards, one configured as a tracker and another as an iGate. The tracker seems to work correctly.
However, the iGate doesn't appear to have workin…
m1geo updated
9 months ago
-
Hello all.
I would like to ask if there is a way to disable acknowledgement when sending a message. In order words if there is a menu that can configure the message options and disable the awaiting…
-
Hi
Recently I am trying to use your APRS flow under node-red.
I am using node-red v3.1.9 and your latest node "node-red-contrib-aprs2 v3.0.2"
Could you check for this error ??
Error: Wrong lon…
-
Similar to iGates, Gateways should beacon to APRS every few hours.
-
The format of OGN-specific beacons is documented in the [wiki](http://wiki.glidernet.org/wiki:ogn-flavoured-aprs).
Unfortunately the preliminary ogn-client version 0.2.6 sends modified receiver beaco…
-
When using `TelnetParser` on an OGN receiver with v0.2.8 of ogn-rf and ogn-decode, standard messages such as the following cannot be parsed:
```
0.502sec:868.194MHz: 1:2:DDFA2F 163754: [ +49.873…
-
Date/Time should show in the GRLevel3 tooltip (placefile Text). As GRLevel3 is the primary interface this allows the user to see when the APRS data was last updated for that user, instead of having to…