-
Because I read about DAWN I switched from 19.07 to current snapshots.
When I observed kernel fails on my Archer C7 v5 I filed this bug on firmware crashes, related to ath10k-ct with firmware (defaul…
-
*zapfret:*
On initial bootup my Tp-Link Archer C7 v2 will not get a WAN address using the LEDE firmware. Although the cable is connected and there is a link light the WAN interfaces for v4 and v6 si…
-
*zapfret:*
On initial bootup my Tp-Link Archer C7 v2 will not get a WAN address using the LEDE firmware. Although the cable is connected and there is a link light the WAN interfaces for v4 and v6 si…
-
**Describe the problem**
openwrt netbird service need to be modified to use netbird dns by using wireguard in userspace.
When the netbird is running in kernel mode, the netbird dns cannot be acc…
-
Please provide this info. See this link for more info on how to gather debug
info: http://www.candelatech.com/ath10k-bugs.php
Description of the problem (how to configure, how to reproduce, how …
-
This issue is a partial clone of my comment in the referenced thread just to let OpenWRT dev team know that this problem is also affecting TP-Link Archer C7 v5 and probably many other devices when a F…
-
*psyborg:*
- Archer C7, Netgear R7800
- 19.07-RC1 default
- install image, configure wifi, try to connect, in my case i'm getting 300Mbps rate, others report as low as up to 54 (legacy only)
…
-
*wrogner:*
Supply the following if possible:
- **Device** problem occurs on
TP-Link Archer C7 v2, Archer C7 v5
- Software **versions** of OpenWrt/LEDE release, packages, etc.
21.02_rc3
…
-
*MartB:*
See: https://git.openwrt.org/?p=project/ubox.git;a=blob;f=kmodloader.c;h=6f06ee3939f2f3e151357d33cfd165603cb40e4d;hb=HEAD#l699
Prints:
In function 'main_insmod',
inlined from 'main'…
-
*Boia11:*
Problem Device:
TP-Link Archer C7 v2
Software version:
OpenWrt 21.02.0 r16279-5cc0535800 , default packages versions.
Steps to reproduce:
Setup wireless with:
Encryption…