-
If you are using an ESP32 and you are using bluetooth with it (like I do for the external temperature updates), it is all written over the place that you have to / really should use the ESP-IDF instea…
-
"I am considering using the Arduino UNO R4 Minima board to build a device analyzer in order to downsize from the DUE. I would appreciate some advice on this."
-
Hi,
Very excited to see this project. I wasn't sure the best way to contact you so I figured I would post an issue here.
I started on converting your hand drawn schematic.
':
C:…
-
Hallo Stefan, ich versuche derzeit Deinen Code für o.g. Contoller anzupassen bzw. zum laufen zu bringen.
Dies gelingt mir leider nicht, zunächst habe ich den Code als ZIP (Library) in die Ardunino ID…
-
I'm not really familiar with how programming works for this type of board. I have done Arduino, but I am a bit over my head here. I have seen examples for this board that include a platformio.ini file…
-
Home Assistant V 0.100.2 hass.io installation
**Description of problem:**
After updating (didn't think to take a snapshot) remote_rpi_gpio can not set up
**Problem-relevant `configuration.yam…
-
Hello!
I successfully bootloaded my Atmega328P thanks to Nick's helps. Bootloading went smootly and I bootloaded my chip using the Lilypad 8MHz configuration as I wanted to operate my chip using 8…
-
I notice a lot of the people I'm speaking to working with the mendelmax 2 are having similar issues, even with different electronics.
Basically when trying to do long prints using USB on the PC, ofte…
-
Hi,
Im changing to Klipper. But I cant connect to Arduino Board after flashing.
My Hardware:
Rapberry PI 4 Model B
Raspberry 7" Display
Ardunino Due (Original)
Radds
Printer Tronxy X5S (rem…