-
```
What steps will reproduce the problem?
1. Using an external Asix AX88772B USB-ETHERNET Adapter with a WLXKJ652 NAS (as
described in Issue 11 to overcome Samba / FTP file transfer instability).
…
-
Very similar to #265 -- same setup (TT@32 MHz, Lightning's Blitz030 and other USB drivers from a10b393, [i-tec USB 2.0 Fast Ethernet Adapter Advance](https://i-tec.pro/en/produkt/u2lan-2/)):
- https:…
-
I've tried various versions of the driver including 1.9.0, and when I plug in the adapter I get errors like this
[34688.799667] usb 3-2.2: new SuperSpeed USB device number 11 using xhci_hcd
[34689.13…
-
手头上有个USB网卡,尝试了
opkg update && opkg install kmod-usb-net-asix-ax88179
但是架构不支持安装,请帮忙在R4S固件中添加,多谢!
-
Support for USB NIC adapters would be really great, especially for those using Intel NUCs and other systems with only a single LAN Adapter.
Please note that in general this is not a driver issue, the…
fabz5 updated
3 years ago
-
Hi all,
i'm facing a big problem with cubieboard2 running the latest firmware update, 3.4.79+. The two USB ports are working fine but when I put 2 USB RJ-45 adapters, only one come up.
Dmesg shows…
-
It would be great if this could be built as a module against existing kernel and replace the currently installed module.
Instructions/modifications to achieve this would be great.
Also, the asix pat…
-
Internet connection is cut out and can't reconnect when using Libusb
-
For Highcharts 10.3.3, the following jsfiddle below is as expected
https://jsfiddle.net/BlackLabel/n562x7yh/
Once I refer to Highcharts 11.1.0, the x-asix label alignment is off with the same of d…
-
注意前向传播中Z2=w2a1+b2,这里的w2应该有四个权重,因为第一层的a有四个!
激活函数不一定是sigmoid
asix=1就相当于让一行的数相加,keeplines保持shape=(n,1)而不是(n,)