-
I've verified my radio is working using the Anytone CPS. Configuring the same data in qdmr leads to me transmitting with the incorrect contact ID of 12345678, when it should be 9998.
I don't know …
-
With each download for the code-plug from my Anytone AT-D878UVII Plus it appends the same `offsets` to the `autoRepeaterSettings`.
Reproduced with qdmr at a335412 and Anytone firmware 3.02n (this als…
-
Device: Any Tone D878UV II Plus
Firmware Version 3.01
Hardware Version 1.10 GD
Radio Data Version 1.00
Reading a codeplug from device works flawlessly. Transfering user.json to device is also wo…
-
Since April 23th. a new Firmware (3.02) is available for D878UVII/IIPlus devices.
After FW install qdmr can't find the radio anymore.
Debug in src/application.cc@446: Last device is invalid, search …
-
The Anytone 878 has seperate settings for
Menu->Settings->Voice Functions-> "DigiMic Level" vs. "AnaMic Level"
I think qdmr is reading and setting the "AnaMic Level" parameter with Settings -> …
-
Yesterday i noticed that i can't write my new contactlist to my 878. It says too many contacts. But the radio can take 200.000 contacts and the file has about 160.000 contacts. In CPS i can write it w…
-
Depending on the configured bands mode the AT D878UV II Plus has different RX and TX limits according to http://members.optuszoo.com.au/jason.reilly1/868mods.htm#SelectingBands
However, the [current …
-
With qdmr built from a82b6a2 I'm hitting a 100% reproducible crash when trying to read from or write to an Anytone D878UV2.
Excerpt from crash log:
```
[…]
Crashed Thread: 10 D878UV2
…
-
- Platform: Raspberry Pi 4, 4GB, Raspberry Pi OS Bullseye (current)
- qdmr: v0.10.2 (compiled and installed as to website instructions)
- Radio: Anytone AT 878-UV, HW: 1.00, Firmware: 1.21
When t…
-
I followed the compile/install instructions at https://dm3mat.darc.de/qdmr/install.html with following errors:
```
radek@saphir:~/Downloads/qdmr-0.9.3/build$ cmake .. -DCMAKE_INSTALL_PREFIX=/usr/…