-
Hey!
I have a question,
Is there a possibility to get prev/next commands from the head unit and multi steering next/prev track signals pass to CDC emulators?
-
Hi,
upon connecting the RX wire sometimes my ATmega324 hangs somewhere in the RX interrupt handler (found this out with debug LEDs, as I can't use JTAG). I don't know how to proceed further when look…
-
Gille Spinelli
Sat 22 Apr 2006 09:59:20 AM UTC
Hi,
I can access at my ATMega324P chip (using pony-stk500 with parallel interface) for erase flash, and rewrite fuse. But I cannot program and/or read…
-
moooseydooom
Tue 01 May 2007 08:54:30 PM UTC
The MCU name "atmega164p" is not recognized by avrdude, although "atmega164" (without the 'p') is. I believe the atmega164 and atmega164p are the same d…
-
I have code from an ATmega328P (using MiniCore) and it works well, but I am setting registers directly.
I have now moved to using an ATmega32 and the code doesn't work and I have searched and searc…
-
Currently you have minicore, mightycore, majorcore and megacore...
Each of these has one entry in the tools -> board menu for each part...
I have a bold and radical suggestion (and certainly one …
-
Hardware
Creality Ender 3 Pro
ATMEGA1284P
Development Platform
Arduino IDE 1.8.9 With Mighty Core 2.0.1
Arduino IDE 1.9 Beta With Mighty Core 2.0.1
Platform IO us…
-
I know that arduino-cli is very new and is still an "alpha preview", but it would be awesome of there was mightycore support for arduino-cli. Have you considered this?
https://github.com/arduino/ar…
-
This is not really an issue but I wanted to get some specific help for the virgin MCU I have and intend to use with internal 8Mhz rc clock for the moment. I looked for any other option to contact the …
-
Hi!
I have a project where PlatformIO is used to program an ATmega324PB. After I upgraded the toolchain I now get this error:
```
Processing MightyCore (framework: arduino; platform: atmelavr; bo…