-
Hi there didn't appear to be a BOM list for this project.
I extracted the list of parts from the PCB and this may come in handy for people without Kicad installed.
[kim-1-programmable-memory BOM.c…
-
Can you provide a bill of materials for the parts used? The schematic doesn't list enough information to find all the parts, in particular the servos. Thank.
-
Could you provide a bill of materials for the project?
-
Is there a bill of materials for assembling a photodiode board? I see the part numbers but when I look them up (for example [the photodiode](https://www.digikey.com/products/en/sensors-transducers/opt…
-
Any image build in OBS produces an additional ".packages" file. That file lists the contained rpm packages with their name, version, disturl and most importantly license. That information is very valu…
-
for actual clamping parts 40x40x5mm for insert to grooves length is approximately 41x47mm.
-
Hello there,
Very nice implementation. Could you please also add the Bill of Materials used so I could reproduce? :)
Thank you,
Pablo G
-
there's no BOM, it's unclear which CPU to use among other things. is C10 a 56pf or 560pf ceramic? c1 and c2 have no polarity marking.
-
Bill of Materials
=============
T.B.D.
-
Where can I find a compiled bill of materials to build a machine like this?