-
### The problem
bk72xx:
board: generic-bk7231t-qfn32-tuya
This board doesn't support HTTP Request
### Which version of ESPHome has the issue?
2023.9.3
### What type of installation are you u…
-
I've had 2 LED bulbs failing to connect to WiFi recently. One was a new install while the second stopped connecting after a power cycle. I managed to connect in AP mode (using 5 power cycles), but was…
-
Somewhere between 1.17.366 and 1.17.375 the LittleFS files are being deleted.
Haven't had a chance to check what version it started from but could be #968 again
-
**Describe the bug**
I am using one of the Tuya water valves on my water mains. I almost never want this to be turned off. However, whenever the beken device is rebooted, it defaults to OFF state. c…
-
### The problem
RGB works without any problems with the RGBWW Light, but as soon as you want to set the cold/warm white temperature via the Homeassistant GUI, the lamp temperature changes as desired,…
-
Hello, I have a BK7231 module with a 56-pin BK7231 chip on it. Can I apply OBK to it? I tried but didn't succeed, thank you!
The BK7231 module (C-3031) information:
http://www.c-chip.com.cn/userfi…
-
Sorry for my English. The program starts, receives data from the logger and sends it further, the settings from SmartESS also work. However, no data appears on the MQTT broker. Logs from the broker sh…
-
WB3S BK7231T
Using a very simple test script I tried to compile it in PlatformIO and got the following error at the end of compilation:
Error: BOARD D:/PlatformIO/Projects/Tuya does not exist.
M…
-
**Describe the bug**
I was happy to have these readings added to the web interface recently but I would like these same values to be provided by the status command as well.
![image](https://user-ima…
-
Issue:
Toggle light only changes bulb from color mode to white mode, not on or off.
Color selector only works on HA interface, not web interface, (web interface will update color status appropria…